Ford 1997 Mark VIII, Руководство пользователя

Страница: 58 / 315

53
Follow the easy steps below to set these buttons to
the desired frequencies:
1. Select a band, then select a frequency.
2. Press one of the memory preset buttons and
hold the button until the sound returns. That
station is now held in memory on that button.
3. Follow the two steps above for each station
memory preset button you want to set.
❑
Using the AUTOSET feature
With AUTOSET, you can continually set strong
stations into your memory buttons without
losing your originally set stations.
Press the “AUTOSET” button once. Your radio
will set the first six strong stations of the band
you are in (AM, FM1, or FM2) into the
memory buttons. The display will show
“AUTO”, then run through the frequencies
setting the memory buttons.
NOTE: If there are fewer than five strong
stations in the frequency band, the remaining
unfilled buttons will store the last strong station
detected on the band.
When all stations are filled, the radio will begin
playing the station stored in memory button 1.
To deactivate the Auto Memory Store mode and
return to manually-set memory button stations,
press the “AUTOSET” button. Display will show
“AUTO” then “OFF”.
Adjusting the tone balance of your radio
❑
Increasing or decreasing bass response
Press the top
c
of the “BASS” button to increase
bass; press the bottom
d
of the “BASS” button to
decrease bass.
File:04fnas8.ex
Update:Wed Jun 19 10:43:44 1996