Ford 1996 Explorer, Руководство пользователя

Страница: 124 / 444

124
*
[IP09000( X)04/95]
■
To prevent humidity buildup inside your vehicle, always
drive with the EATC System turned on.
*
[IP09100( X)03/95]
■
Do not put objects under the front seats that interfere with
the flow of air to the back seat area.
[IP09200( X)03/95]
■
Remove any snow, ice, or leaves from the air intake area of
your EATC System which could block the air intake. The
intake area is located at the bottom of the windshield.
*
[IP09300( X)04/95]
Service
*
[IP09400( X)04/95]
If your EATC is not operating as described here, take it to your
dealer to have it checked. System diagnostics are built in which
will allow your dealer to readily identify problems that might
occur.
[IP09500( X)10/94]
Rear Fan and Airflow Operation
*
[IP09600( X)03/95]
Fan speed adjustment
[IP09700( X)05/95]
The H (right) knob controls the volume of air flow. Rotate the
knob upward to increase fan speed and increase the amount of
air entering the vehicle. Three fan speed positions are available
and are indicated by dots beside the
H knob. The largest dot is
high speed position.
[IP09800( X)10/94]
In O (OFF), all blower motor operation is stopped.
*
[IP09900( X)08/94]
Airflow selections
[IP10000( X)05/95]
Q
(Vent)
[IP10100( X)05/95]
Airflow will be to the upper console registers when
Q
is
selected.
*
[IP10200( X)08/95]
R
(Floor)
[IP10300( X)05/95]
Airflow will be to the floor when
R
is selected.
File:06unipx.ex
Update:Thu Feb 29 09:05:45 1996