![Ford 1989 Bronco Скачать руководство пользователя страница 58](http://html1.mh-extra.com/html/ford/1989-bronco/1989-bronco_owners-manual_2317356058.webp)
To install the new bulb, follow the removal procedures in reverse order.
Replacing headlamps (sealed beam)
1. Make sure the headlamp switch is in the off position, then open the
hood.
2. Remove the four screws from the
headlamp assembly and carefully
remove the lamp/bezel.
3. Remove the four screws and the
retaining ring.
4. Disconnect the electrical
connector from the lamp and
remove the lamp.
To install the new lamp, follow the
removal procedures in reverse order.
Replacing front parking lamp/turn signal bulbs
1. Make sure the headlamp control is in the off position.
2. Remove the headlamp assembly. Refer to
Replacing headlamp bulbs
in this section.
Aerodynamic
Lights
58
2010 Econoline
(eco)
Owners Guide, 3rd Printing
USA
(fus)