Forcepoint V10000, Руководство по модернизации устройства

Страница: 40 / 90

Upgrading V-Series Appliances
36

Upgrading V-Series Appliances
■ Web Security Release Notes
■ Content Gateway Release Notes
■ Email Security Gateway Release Notes
For the 7.8.4 release, please review the release notes below.
■
Web Security Release Notes
■ Content Gateway Release Notes
■ Email Security Gateway Release Notes
Verify Network Agent settings
If you had to record your Network Agent settings prior to upgrade (
Network Agent
settings
, page 29 ), restore them after the TRITON console has been upgraded.
Log on to TRITON - Web Security and go to Settings > Network Agent > Local
Settings .
Select the IP address of the affected Network Agent installations and check and
restore all values, paying particular attention to:
● Filtering Service IP address
● If Filtering Service is unavailable
● Proxies and Caches
● Port Monitoring
● Ignore Port
● Debug Setting
Also, check the Settings > Network Agent > NIC Configuration page for each NIC:
● Use this NIC to monitor traffic
● Monitor List
● Monitor List Exceptions
When your changes are complete, click OK and then Save and Deploy .