Forcepoint V10000, Руководство по модернизации устройства

Страница: 30 / 90

Upgrading V-Series Appliances
26

Upgrading V-Series Appliances
Upgrading V-Series appliances from v7.8.1 to 7.8.2 and
from v7.8.1, v7.8.2 or 7.8.3 to 7.8.4
V-Series Appliance Upgrade Guide | Upgrades to v7.8.x
This upgrade process applies to version 7.8.1, 7.8.2, and 7.8.3 for the following
TRITON components and platforms:
● Web Security, Web Security Gateway, and Web Security Gateway Anywhere
● Email Security Gateway and Email Security Gateway Anywhere
● V10000 G2 and G3 and V5000 G2 appliances
Here are the various upgrade paths to version 7.8.2, 7.8.3, or 7.8.4. The table also
includes the path for upgrading from version 7.7.x to 7.8.1. You must upgrade to
version 7.8.1 before you can upgrade to 7.8.2 or later:
Related topics:
●
Estimates of time to complete upgrade
, page 27
●
Preparing for the appliance upgrade
, page 28
●
Upgrade instructions
, page 30
●
Upgrading multiple V-Series appliances
, page 32
●
Post-upgrade activities
, page 34
Important
V10000 G4 and V5000 G3 appliances running 7.8.1,
7.8.2, or 7.8.3 cannot be upgraded to a higher version of
7.8.x using an upgrade patch (a patch can be used to
upgrade to any version of 8.x). Attempting to upgrade
using the 7.8.x upgrade patch that’s offered will result in a
pre-check verification failure.
With these models, to move to a higher version of 7.8.x,
perform a full back of the appliance, re-image the
appliance with the desired version of 7.8.x, and restore the
backup. See
Restoring to Factory Image in the V-Series
Getting Started guide, and the knowledge base article
V-Series USB image for restoring to factory settings .
To upgrade
from To this version Step One Step Two Step Three
7.7.x 7.8.1 Apply HF 90 Upgrade to 7.8.1
7.7.x 7.8.2 Apply HF 90 Upgrade to 7.8.1 Upgrade to 7.8.2