Upgrading V-Series Appliances
31
Upgrading V-Series Appliances
● Port Monitoring
● Ignore Port
● Debug Setting
NIC Configuration settings (from the
Settings > Network Agent > NIC
Configuration
page for each NIC) are also not preserved:
● Use this NIC to monitor traffic
● Monitor List
● Monitor List Exceptions
Save your record where you can easily access it when the upgrade is complete.
Administrator accounts
Make sure the administrator accounts authenticated by a directory service have an
email address specified in the directory service. In version 7.8.x, an email address is
required for each administrator account (except group accounts).
Content Gateway changes
for information about enhancements and
changes in version 7.8.2.
for information about enhancements and
changes in version 7.8.3.
for information about enhancements and
changes in version 7.8.4.
Upgrade instructions
V-Series Appliance Upgrade Guide | Upgrades to v7.8.x
1. If you have multiple V-Series appliances, read
before
following this procedure.
2. Take all precautions to ensure that power to the V-Series appliance is not
interrupted during the upgrade. Power failure can result in operating system and
software component corruption.
Important
V-Series appliance services are not available while the
patch is being applied and until the appliance completes
restarting. See
Estimates of time to complete upgrade
.
It is best to perform the upgrade at a time when service
demand is low.
