Forcepoint V10000, Руководство по модернизации устройства

Страница: 16 / 90

Upgrading V-Series Appliances
12

Upgrading V-Series Appliances
2. On that secondary appliance, in the V-Series console, navigate to
Configuration > Web Security Components .
3. For Policy Source , select Full policy source . Save the setting.
4. Upgrade this appliance to version 7.7.x. The appliance automatically restarts
when the upgrade finishes.
After the original
Full policy source
appliance has been upgraded, replaced, or
re-imaged, change the upgraded temporary
Full policy source
machine to point to the
original
Full policy source
again for its policy information. To do this:
1. Upgrade the primary appliance. When the upgrade is done, the appliance
automatically restarts.
2. On the previously upgraded secondary appliance, in the V-Series console,
navigate to Configuration > Web Security Components .
3. For Policy Source , select User directory and filtering or Filtering only and
enter the IP address of the primary appliance. Save the setting.
4. Use the version 7.7.x TRITON installer to upgrade remaining off-appliance
components. See Upgrading Websense Web Security Solutions for instructions.
To see all upgrade instructions go to
Upgrading V-Series appliances from v7.6.x to
7.7.x
, page 3 .
Post-upgrade activities
V-Series Appliance Upgrade Guide | Upgrades to v7.7.x
● If your appliance includes Email Security Gateway (Anywhere), perform the
Email Security Gateway Post-upgrade activities .
● If your appliance hosts a Web Security Policy Server (is a user directory and
filtering appliance), log onto the TRITON console, go to the Web Security
manager
Settings > General > Policy Servers page, and add the Policy Server
instance. Next, go to the TRITON console Appliances tab and register the
appliance.
● If your appliance includes Web Security Gateway (Anywhere), perform the
Content Gateway Post-upgrade activities .
● If your appliance uses the Network Agent module,
Verify Network Agent settings
,
page 12 .
● Review the Release Notes for the TRITON solutions on your appliances (links
provided below). There are several new features that may require some
configuration to put into effect.
Web Security users will be especially interested in the Threats dashboard (no
configuration needed). Web Security Gateway (Anywhere) users will be
interested in the enhanced outbound scanning options. It is recommended that all
of the Scanning Options be reviewed.
■ Web Security Release Notes
■ Content Gateway Release Notes
■ Email Security Gateway Release Notes