Upgrading V-Series Appliances
13
Upgrading V-Series Appliances
If you are upgrading to version 7.7.3, see the
for
information about enhancements and changes in version 7.7.3.
Verify Network Agent settings
If you had to record your Network Agent settings prior to upgrade (
), restore them after the TRITON console has been upgraded.
Log on to TRITON - Web Security and go to
Settings > Network Agent > Local
Settings
.
Select the IP address of the affected Network Agent installations and check and
restore all values, paying particular attention to:
● Filtering Service IP address
● If Filtering Service is unavailable
● Proxies and Caches
● Port Monitoring
● Ignore Port
● Debug Setting
Also, check the
Settings > Network Agent > NIC Configuration
page for each NIC:
● Use this NIC to monitor traffic
● Monitor List
● Monitor List Exceptions
When your changes are complete, click
OK
and then
Save and Deploy
.
