Force SPARC/CPCI-520G, Техническое справочное руководство

Страница: 29 / 134

Installation Installation Prerequisites and Requirements
SPARC/CPCI-52x(G) Page 15
Thermal
requirements The operating temperature is 0
°
C to +55
°
C (humidity 5 % to 95 % non-
condensing at +40
°
C), when operating the SPARC/CPCI-52x(G) in sys-
tems providing a minimum forced airflow of 300 LFM (linear feet per
minute). The typical operating temperature of the system is 0
°
C to
+40
°
C.
Audio interfaces Simultaneous use of the audio interfaces available on the front panel and
on the backplane can damage on-board hardware or connected devices.
For example: never use the headphone/line audio output at the backplane,
if a headphone is plugged into the front-panel jack.
• Always use at most one of the interfaces if an audio interface is avail-
able on both the front panel and the backplane.
Table 4 Maximum power supply values without UPA64S card and PMC modules
CPU board +5 V +3.3 V +/-12 V V I/O
SPARC/CPCI-520 6.5 A 4.6 A not required 200 mA
SPARC/CPCI-520G 6.5 A 4.6 A not required 200 mA
SPARC/CPCI-522 7.8 A 5.6 A not required 200 mA
SPARC/CPCI-522G 7.8 A 5.6 A not required 200 mA
SPARC/CPCI-523G 7.8 A 5.6 A not required 400 mA
Creator Graphic Card 1.3 A 2.2 A not required not required
Table 5 Environmental requirements of the SPARC/CPCI-52x(G)
Operating Non-operating
Temperature 0
°
C to +55
°
C –40
°
C to +85
°
C
Forced air flow 300 LFM (linear feet per minute) –
Temp. change +/– 0.5
°
C/min +/– 1
°
C/min
Rel. humidity 5 % to 95 % noncondensing
at +40
°
C
5 % to 95 % noncondensing
at +40
°
C
Altitude –300 m to +3,000 m –300 m to +13,000 m