Force S4810P, Установка, Страница: 42 / 49

42 S4810 Specifications
Figure 11 The European WEEE symbol
In accordance with the European WEEE Directive, electrical and electronic equipment (EEE) is to be
collected separately and to be reused, recycled, or recovered at end of life. Users of EEE with the WEEE
marking per Annex IV of the WEEE Directive, as shown above, must not dispose of end of life EEE as
unsorted municipal waste, but use the collection framework available to customers for the return, recycling
and recovery of WEEE. Customer participation is important to minimize any potential effects of EEE on
the environment and human health due to the potential presence of hazardous substances in EEE.
Force10 Networks products, which fall within the scope of the WEEE, are labeled with the crossed-out
wheelie-bin symbol, as shown above, as required by WEEE.
For information on Force10 product recycling offerings, see the WEEE Recycling instructions on iSupport
at:
https://www.force10networks.com/CSPortal20/Support/WEEEandRecycling.pdf .
For more information, contact the Force10 Technical Assistance Center (TAC) (see Contacting the
Technical Assistance Center ).
SD card removal
The SD card can be removed and re-installed, to support high security environments. Force10 Networks
recommends the card be removed only when necessary. It should only be removed and replaced by
authorized personnel. .
To open the case:
1 Remove the small phillips screws that connect the top to the body. There are three screws evenly
spaced across the rear and three screws evenly spaced along each side.
2 Slide the top backwards until its front flange slides free of the faceplate, then lift it off.
Caution: The SD card should only be removed to support high security operations and after discussions
with Force10 Technical Support or your Force10 representative.