Force America ONE SSC5100ex, Быстрый старт

Страница: 15 / 20

FORCE America ONE
TM
Quick Start Manual
Hoist/Plow Calibration
11
FORCE America ONE
TM
System Calibration
The following information describes the calibration for the specific features related to the FORCE
America ONE
TM
system. For details on the features that are not specific to the FORCE America
ONE System please consult the M0019 SSC5100ex Calibration Manual.
Entering the Calibration Menu
The Calibration menu is entered by pressing the Calib button in the Main Menu. Unlike the
Material Select, Unload, Data, and Version Menus, the Calibration Menu requires the entry of an
Access Code before it will appear. You can insert a USB supervisor key instead of entering the
access code to access the Calibration Menu.
To enter Calibration using Access Code:
1. While the system is in Standby, press the Menu button on the Operation Screen.
2. Press the Calibration menu button. The Access Code window will appear, as shown in
Figure 9.
Figure 9: The Access Code Window
3. Enter the access code using the up and down arrow buttons on screen. Use the left and
right arrows to move to a different digit. You may also tap a number cell to highlight it.
The factory default access code is 00000000.
When entering the Access Code, the buttons have the following functions:
Input Function
Increase the highlighted digit by 1.
Decrease the highlighted digit by 1.
Highlight the previous digit.
Highlight the next digit.