Force AeroCollect Скачать руководство пользователя страница 9

7 Warranty

 

 The limited warranty that applies to AeroCollect

®

 will be null and void if the 

following is not complied with:

The device and sampling chambers must not be exposed to violent knocks or impacts 

The AeroCollect

®

 device and sampling chambers must not under any circumstances be 

immersed in water or any other liquid and must be stored in the accompanying case so as to 
be protected from moisture during those periods when not in use.  

Cleaning and disinfection must be carried out in accordance with the associated section in 
this manual. 

The AeroCollect

®

 device must not be dismantled. 

 
When shipping the device, it must be sent in the accompanying case.  

If the AeroCollect

®

 device stops working, regardless of the reason, immediately 

contact AeroCollect for the purpose of determining the cause of the malfunction. 
See below for contact details. 

Technical specifications

8.1 Battery

AeroCollect

®

 is powered by two AA batteries. These may be single use or 

rechargeable batteries and they must be disposed of in accordance with the 
manufacture’s instructions

8.2  

Expected battery lifetime

The AeroCollect

®

 device is capable of collecting samples for a minimum of 

two concecutive hours using two fully-charged batteries.

8.3 

Operating environment

8.3.1  Recommended temperatures for AeroCollect

®

:

 

 Storage temperature range:  

-20ºC to +40ºC

 

Transport temperature range:  

-40ºC to +60ºC

 

Normal use temperature range:  

-20ºC to +40ºC

Содержание AeroCollect













Отзывы: