Force USA F-TRAPBAR-01, Руководство пользователя

Страница: 3 / 12

IMPORTANT ASSEMBLY INFORMATION
Tools Required for Assembling the Equipment : Adjustable Wrench and Allen Wrench.
NOTE: It is strongly recommended that this equipment is assembled by two or more
people to avoid possible injury.
Ensure
Carriage Bolts are inserted through the SQUARE holes on components that need to
be assembled. Attach washer only to end of the Carriage Bolt.
Use
Allen Bolts or Hex Bolts inserted through the ROUND hole on components that need
to be assembled.
Always wait until all bolts are assembled onto the
equipment before tightening the bolts. Do
not tighten each bolt right after it is installed .
Fasten Nuts and Bolts
Securely tighten all Nuts and Bolts after all
components have been assembled in current and
previous steps.
NOTE: Do not over tighten any component with
pivoting function.
Make sure all pivoting components are able to move
freely.
Do not tighten all Nuts and Bolts in this step.
2