Force RC FCES03001T1, Инструкция по эксплуатации

Страница: 11 / 19

11
EN
WARHAWK
™
OUTBREAK
™
Part # Description Benefi t
KXSB2000EC 2 Cell 4000mAh LiPo Longer run times (LiPo Compatible charger required)
KXSC1002 Quick Charger Shorter charge times for the included battery, required for the LiPo upgrade battery
KXSS0500 Motor/ ESC Combo More speed, longer run times
SPMSS6180 Steering Servo Waterproof, better steering authority
SPM2335 DX2E ACTIVE Transmitter/
SR310 Receiver Combo Spektrum compatibility, Waterproof receiver, Telemetry options:
SPM6743 DX2E ACTIVE Speedometer Bundle, SPM6744 DX2E ACTIVE Dashboard Bundle
Problem Possible Cause Solution
Short Run Time • Battery damaged/not charged
• Motor dirty or brushes worn • Check/change battery
• Check/clean/replace
Sluggish Action • Motor dirty or brushes worn
• Bind in drivetrain
• Vehicle battery is not charged • Check/clean/replace
• Clean/adjust
• Replace/recharge
Controls Reversed • ST. REV or TH. REV • Change switch position
Motor/ESC overheat • Running conditions putting a high strain on
the power system • Avoid overly tall grass and muddy conditions
Doesn’t Operate • Transmitter batteries low
• Transmitter powered off
• ESC powered off
• Vehicle battery is not charged • Replace/recharge
• Power On
• Power On
• Replace/recharge
Poor Range • Transmitter batteries low
• Receiver antenna damaged • Replace/recharge
• Check/repair/replace
The system will not
connect • Transmitter and receiver too near each other
• Transmitter and receiver too near large
metal objects (vehicles, etc.)
• Receiver accidentally put in bind mode so
receiver is no longer bound
• Move transmitter 8–12 feet (2.4–3.6m) from receiver
• Move away from large metal objects (vehicles, etc.)
• Rebind transmitter and receiver
The receiver goes into
failsafe mode a short
distance away from
the transmitter • Check the receiver antenna to be sure it is
not cut or damaged
• Contact Horizon Product Support
• Make sure receiver antenna is in an antenna tube and
is above vehicle
The receiver quits
responding during
operation • Low battery voltage
• Loose or damaged wires or connectors
between battery and receiver
• Completely recharge battery
• Do a check of the wires and connection between
battery and receiver. Repair or replace wires and/or
connectors
Receiver loses its
bind • Transmitter accidentally put in bind mode,
ending bind to receiver
• Bind transmitter to receiver
TROUBLESHOOTING GUIDE
RECOMMENDED UPGRADES