EN
Model Assembly Continued
Wing Installation
1. Remove the canopy hatch (
A
) from the fuselage.
2. Slide the wing tube (
B
) into the fuselage.
3. Install the left and right wing (
C and D
) over the wing tube and into the
wing slot of the fuselage while inserting the aileron servo connectors
through the provided holes.
CAUTION:
DO NOT crush or otherwise damage the wiring when
attaching the wing to the fuselage.
4. Secure the left and right wings to the fuselage using the included
4 screws (
E
).
Tip:
If needed, use hemostats or pliers to pull the servo connectors into the
fuselage.
5. Connect the aileron servos (
F
) from the wings to the Y-harness connectors
in the fuselage. The left and right aileron servos can be connected to either
side of the Y-harness.
6. Reinstall the canopy hatch on the fuselage.
Disassemble in reverse order.
A
B
C
D
C
A
D
B
F
F
E
3mm X 25mm
5
