7. Place your elbow on a flat surface. Relax your
hand with the palm facing up.
8. Make sure the cuff is about the same height as
the location of your heart.
9. Remain still and do not talk or move during the
measurement.
10. Tap On/Off Button. All the LCD symbols will
appear and a symbol for person 1 will blink.
Press the On/Off button to select and start the
test.
11. The pump will start to inflate.
12. After the measurement is completed, the
results are automatically uploaded to the 24/7
HealthView Telehealth system if the meter is
paired to an app or within range of a Gateway.
Note: If you want to select a different user
number, use the arrow buttons and the press the
On/Off Button to start the test.
1. Read the P20b manual carefully before first use.
2. Stretch your arm in front of you with your palm
facing up. Slide and place the cuff onto your
arm.
3. Wrap and tighten the cuff above your elbow.
The red line on the edge of the cuff should be
approximately 0.8” to 1.2” (2 cm to 3 cm) above
your elbow.
4. Leave a little free space between the arm and
the cuff; you should be able to fit two fingers
between them. Clothing must not restrict
the arm. Remove all clothing covering or
constricting the measurement arm.
5. Press the hook material firmly against the pile
material. The top and bottom edges of the cuff
should be tightened evenly around your upper
arm.
6. Sit down for at least 10 minutes before
measuring.
Performing a Test