8
Data Transmission through Telephone Line
(FORA GW9014A Gateway contains built-in ISP dial-up service.)
1. Open FORA GW9014 Gateway kit and take out the contents.
2. Plug power adapter into a power outlet and power adapter port on the
gateway.
3. Connect RS232 interface cable to RS232 port on the gateway.
4. Securely insert telephone line into one of the telephone line port on
the gateway. If you want to use telephone, please insert its telephone
line to another telephone line port on the gateway.
5. Turn on gateway power. (“O” presents as turn off, “―” presents as
turn on)
6. Congratulations! You have completed all the installation. Please
check if the PWR LED indicator is lit as the illustration below.
(Tel-Line)
(Phone)
PLEASE NOTE
You can choose either Ethernet or telephone line to transmit data. Do not
use both of them at the same time.
