18
Product No. 064-4013-4 • Model No. SP5719
•
Make sure the unit is turned OFF, unplugged and the heating elements of heater are cool whenever you are cleaning
the heater.
•
Clean the metal trim using a water-dampened soft, clean cloth. DO NOT use brass polish or household cleaners as
these products will damage the metal trim.
•
The motors used on the fan and the flame generator assembly are pre-lubricated for extended bearing life and
require no further lubrication. However, periodic cleaning/vacuuming of the fan/heater and air intake/ output vents is
recommended.
•
Any other servicing should be performed by an authorized service representative.
•
When the heater is not in use, the heater should be stored in a dry location, away from possible damage. The power
cord should be stored properly to avoid contact with hot or sharp objects.
Cleaning and Maintenance
Warning!
Make sure the power is turned off before proceeding. Any electrical repairs
or rewiring of this unit should be carried out by a licensed electrician in accordance with
national and local codes. If repairing or replacing any electrical component or wiring, the
original wire routing, colour coding and securing locations must be followed.
Warning!
Do not use this fireplace if any part of it has been under water. Immediately call
a qualified service technician to inspect the fireplace and replace any part of the electrical
system.
Warning!
During any service of this appliance, the power to the unit must be turned off.
First turn the main power switch to the “OFF” position. Then remove the electrical plug from
the wall outlet.
Warning!
Electrical outlet wiring must comply with local building codes and other
applicable regulations to reduce the risk of fire, electric shock and injury to persons.
Warning!
Disconnect power before attempting any maintenance or cleaning to reduce the
risk of fire, electric shock or personal injury.
