for Living Bluebay FHTS80021D, Руководство по сборке

Страница: 31 / 66

30 30 31
Tr
oubleshooting
Irregular flame
pattern flame
does not run
the full length
of burner
No gas flow Exchange, refill or replace LP gas tank
Flame is yellow
or orange
New burner may have
residual manufacturing oils
Burn outdoor fireplace for 15 minutes and
reinspect
Spider webs or insect nest in
burner/venturi tube
Clean burner/venturi tube
Poor alignment of valve to
burner/venturi tube
Ensure burner/venturi tube is properl
engaged with valve
Flashback (fire
in venturi/
burner tube(s))
Burner and/or burner/
venturi tube is blocked
Clean burner and/or burner/venturi tube
Flame goes
out
High or gusting winds Do not use outdoor fireplace in high winds
Low on LP gas
Exchange, refill or replace LP gas tank
Excess flow valve tripped Refer to “Sudden drop in gas flow or reduced
flame height”
Flame seems to
lose heat when
burning in cold
weather — tem-
perature below
50°F (10°C)
Ice has built up on the
outside of the LP gas
tank because the
vapourization process
is too slow
1. Turn o ff per “Turning O ff ” section
2. Replace with a spare LP gas tank
3. Reconnect LP gas tank per “Installing LP Gas
Tank” section
4. Follow “Checking for Leaks” section
5. Light outdoor fireplace per “Lighting” section
Sudden drop
in gas flow or
reduced flame
height
Out of gas
Overfilling prevention device
may have been activated
Exchange, refill or replace LP gas tank
1. Turn control knob to “OFF”
2. Wait 30 seconds and light outdoor fireplace per
“Lighting” section
3. If flames are still too low, reset the overfilling
prevention device:
a. Turn control knob to “OFF”
b. Turn LP gas tank valve to “CLOSED”
c. Disconnect regulator
d. Turn control knob to “ON”
e. Wait one minute
f. Turn control knob to “OFF”
g. Reconnect regulator and leak check
connections, being careful not to fully open valve
h. Light outdoor fireplace per “Lighting” section