for Living 063-6294-4, Руководство по сборке

Страница: 10 / 32

Step 3
Requires 1, 5
Place the other end cap (5) onto the spring tube set (1). NOTE: Assemble on the floor.
1
5
tapered end
1
Step 4
Requires 2
Check that the twist tube (2) can easily slide up and down. NOTE: Assemble on the floor.
2
loosen
2
correct assembly of twist tube (2)
INNER tube OUTER tube
transition ring
plastic spiral
10
Model No. 063-6294-4
NOTE: If tubes separate, reinsert the inner tube into the outer tube with the plastic spiral opposite
the transition ring. Slide the inner tube until it extends more than halfway out past the transition
ring, as shown below.
A
ss
em
bl
y
NOTE: If needed, loosen the twist tube (2) by twisting the OUTER tube COUNTER-CLOCKWISE;
be sure the white plastic spiral is covered by the outer tube.