Ceramic Heater
7
Operation - Heater mode
1. Locating the heater
2. Connecting the heater to the power supply
WARNING!
• Read each step carefully before beginning any installation and make sure you
understand each step.
• Keep children and pets away during heater operation.
•
Do not use the heater without the grill in place.
•
Place the heater (1) on a firm, level surface free
from obstructions, and at least 3' (0.9 m) away
from any wall (2) and any other combustible
materials such as furniture, pillows, papers,
clothes and curtains. Also place it in an upright
position before turning on (fig. 1).
3’
3’
1
1
2
•
Make sure the power level switch (1) is in
(OFF) position. Connect the power cord (2)
of the heater into a grounded 120 V AC, 60 Hz
outlet (3) (fig. 2).
WARNING!
• Make sure the plug fits tightly in the outlet. A loose connection may cause overheating
and damage to the plug or heater.
•
Disconnect the heater from the power supply when the heater is not in use.
2
2
3
1
NOTE:
• The heater may emit foul odor or smoke during its initial usage, owing to the "burning off" of
the heating element lubricant. This is normal and will go away after a few minutes of
usage.
•
It is recommended to not use the heater around birds and pets until the manufacturing
corrosion coating burns off as those creatures tend to be sensitive to the fumes.
