FOR-A UFH-70DAC, Руководство по эксплуатации

Страница: 9 / 22

3
2-2. Rear Panel
No Name Description
(1)
HD/SD-SDI IN
HD/SD-SDI
OUT
The left connector is used to input a serial digital component signal
(HD/SD-SDI).
The right connector is active through output of HD/SD-SDI IN. The
jitter in the active-through output depends on how much jitter is
included in the input video. This card module has no jitter-reducing
function.
(2)
Y / G / C1
(HD/SD,
ANALOG OUT) The signal input from (1) is D/A converted and output from (2), (3),
(4), and (5). The Y (HD/SD component), G (RGB component) or
composite signal can be output from this connector (2).
(3)
P
B
/ B / C2
(HD/SD,
ANALOG OUT)
The signal input from (1) is D/A converted and output from (2), (3),
(4), and (5). The P
B
(HD/SD component), B (RGB component),
Y(Y/C) or composite signal can be output from this connector (3).
(4)
P
R
/ R / C3
(HD/SD,
ANALOG OUT)
The signal input from (1) is D/A converted and output from (2), (3),
(4), and (5). The P
R
(HD/SD component), R (RGB component), C
(Y/C) or composite signal can be output from this connector (4).
(5)
SYNC / C4
(HD/SD,
ANALOG OUT) The signal input from (1) is D/A converted and output from (2), (3),
(4), and (5). The composite, bi-level sync, or tri-level sync signal can
be output from this connector (5).
The FUNCTION (see previous page) on the front panel enables you to select the type of signal
output from HD/SD ANALOG OUT (see also section 4-3).
SYNC/C4 P /R/C3 P /B/C2 Y/G/C1
Y
B
R
C
HD/SD-SDI IN
HD/SD ANALOG OUT
UFH-70DAC
(1) (2) (3) (4) (5)