33
5. Troubleshooting
If any of the following problems occur during operation of your MFR-1000, proceed as indicated below to
see if the problem can be corrected before assuming a unit malfunction has occurred.
IMPORTANT
If the problem cannot be corrected by performing the procedures below, turn the unit off and then on
again. If this still does not correct the problem, contact your dealer.
Problem
Check
Remedy
No image output.
Are there signal inputs to the video
input connectors?
Input video signals to the video
input connectors.
Are cables properly connected for the
signal inputs?
Connect cables properly.
Is the crosspoint set properly?
Set crosspoints properly.
Unable to control using
the remote control panel.
Is the LAN cable properly connected? Connect the LAN cable properly.
Is the RU Info page in the Web-based
Control indicating NG?
Check the item that is indicated
as NG. However, if the Voltage is
indicated as NG, contact your
FOR-A agent. See the
Web-based Control Operation
Manual for details.
