5
2-3. Setup
1.
After logging in, the screen as shown below opens.
2.
Select
Network
from the left pane and change the network settings by selecting and inputting
details on the right.
3.
Select
LAN3
in the
Select the network adapter:
and change the network settings to match
the system.
Factory settings are shown as follows.
IP address:
192.168.1.60
Subnet mask:
255.255.255.0
Default gateway:
No settings
DNS server:
No settings
* Selecting LAN1 opens a setting screen for the 1GbE port that is installed as standard in the LTS.
4.
After inputting the above settings, click
Save
in the lower right corner. A confirmation dialog
box appears, so click
Yes
to shut down the LTS.
5.
Press the power button on the front panel to reboot.
