FOR-A HVS-XT100, Руководство по эксплуатации

Страница: 162 / 236

162
19. Reboot and Initialize
19-1. Rebooting System
(1) Press MENU in the SELECT/KEYPAD block, then press SETUP to display the SETUP top
menu.
(2) Turn F1 to select SYSTEM, then press F1 or the page down button to open the [SETUP -
SYSTEM] menu.
(3) Turn F1 to select REBOOT, then press F1. Press the ENTER button in the SELECT/
KEYPAD block to reboot the system.
SETUP :>FORMAT >REF I/O >ARCNET >ETHERNET
SYSTEM :>RS-422 >TIME >INIT >
REBOOT
19-2. System Initialization
To initialize the system settings, follow the procedure below.
(1) Press MENU in the SELECT/KEYPAD block, then press SETUP to display the SETUP top
menu.
(2) Turn F1 to select SYSTEM, then press F1 or the page down button to open the [SETUP -
SYSTEM] menu.
(3) Turn F1 to select INIT, then press F1 or the page down button to display the [SETUP -
SYSTEM - INIT] menu.
SETUP :>FORMAT >REF I/O >ARCNET >ETHERNET
SYSTEM :>RS-422 >TIME >
INIT >REBOOT
(4) Turn F1 to select SETUP(expSYS) , then press F1 to initialize the switcher setup data aside
from the system data.
SYSTEM : INIT : LOAD : : 1/1
INIT : >
CURRENT : =LAST : :
CURRENT: Resets settings for the BKGD, KEY, DSK, MATT, CHR KEY, SUB
EFFECT, TRANS and WIPE menus.
SETUP(expSYS): Resets the SETUP menu parameters and still memory, aside from the
following parameters:
-FORMAT in the [SETUP - SYSTEM - FORMAT] menu
-All parameters in the [SETUP - SYSTEM - ARCNET] menu
-All parameters in the [SETUP - SYSTEM - ETHERNET] menu
-All parameters in the [SETUP - SYSTEM - TIME] menu
CUR&SETUP: Resets settings including CURRENT and SETUP(expSYS) above.
FACTORY: Resets DIRECT PATT, EVENT and MACRO data and all parameter
settings in CURRENT and SETUP (all SETUP menu parameters)
parameters above.

See section 4-3. "How to Return Settings to Default" for details on initializing menus.

See section 15-6. "Loading Event at Start-up" for details on loading desired settings at
system startup.