FOR-A HVS-XT100, Руководство по эксплуатации, Страница: 138 / 236

138
15-4. Event Data
15-4-1. Data Not Saved in Events
All SETUP menu settings
All FILE menu settings
STILL images
ADV CTRL settings in the TRANS menu (See section 8-10-1.)
15-4-2. Detailed Data Selection for Saving Events
When STORE is pressed while storing events, the [EVENT STORE] menu is displayed and
data to be saved to the event can be selected in the menu as shown below.
EVENT :SELECT :XPT :DATA : RATE : 1/2
STORE : =ALL : =ON : =ON : =OFF :P.00
EVENT :AUX SEL:AUX RCL:DSK ASG:CG WIPE: 2/2
STORE : =ALL : =OFF : =OFF : =OFF :P.00
[EVENT STORE] menu
Item Setting
(*1)
Description
SELECT ALL ,
BKGD
(*2)
,
KEY1-KEY2,
DSK2-DSK2,
CK, EFF
To select bus data, select ALL or a bus under SELECT
then set ON (default) or OFF under XPT and DATA .
All bus data (signal selection transition rate, transition
type settings, etc.) is stored as factory default settings.
If set DATA to ON and XPT to OFF:
All data for the bus excluding the signal selection is saved
to events.
If set DATA to OFF and XPT to OFF:
No data for the bus is saved to events.
XPT ON , OFF
DATA ON , OFF
*RATE OFF , 1-999 See section 15-5. "Transitions Using Event Recall."
AUX SEL ALL , AUX1-AUX8 Select an AUX bus at AUX SEL .
Setting AUX RCL to ON stores the information for the
bus.
AUX RCL ON, OFF
*DSK ASG ON, OFF Setting to ON stores the output bus where DSK1 and
DSK2 images appear.

See section 8-5-1. Where DSK Images Appear."
*CG WIPE ON, OFF Setting to ON stores the current CG WIPE data.
* Indicates the same item in both [EVENT MEMORY] and [EVENT STORE] menus.
(*1) Default settings are displayed in bold text . Default settings can be changed. (See the next page.)
(*2) The
MATT menu settings are saved under BKGD
IMPORTANT
User Default Settings for the [EVENT STORE] menu
The same parameters (RATE, KEY ASG and CG WIPE) in the [EVENT MEMORY]
and [EVENT STORE] menus link together. When one is changed in the [EVENT
MEMORY] menu, it is also changed in the [EVENT STORE] menu and becomes the
default setting in the [EVENT STORE] menu, but not vice versa.

See section 15-4-3. "Setting the User Default Menu when Storing an Event."