FOR-A HVS-XT100, Руководство по эксплуатации

Страница: 136 / 236

136
15-2. Recalling Events
Let's load EVENT 12 (PAGE1, Number Button 2) saved in the previous page to the control
panel.
(1) Press EVENT in the SELECT/KEYPAD block.
The [EVENT MEMORY] menu is displayed and the keypad switches to EVENT mode.
(2) Turn F1 to select 1 (PAGE 1) in the [EVENT MEMORY] menu.
Turn F2 to set DIRECT to ON to change the mode to DIRECT RECALL.
EVENT : PAGE :DIRECT :PAGECLR: RATE : 1/2
MEMORY : =
1 : = ON : >CRNT : =OFF : L=0
(3) Press 2 on the keypad. EVENT 12 will be loaded to the control panel.
The number of the last recalled event is displayed at bottom right in the [EVENT MEMORY]
menu. This indication is useful when checking which event was recalled last.

If DIRECT RECALL is Disabled:
If DIRECT is set to OFF in the [EVENT MEMORY] menu, you need to press RECALL after
pressing 2 on the keypad to recall the event.

Selecting Data to be Loaded
If DIRECT is set to OFF in the [EVENT MEMORY] menu, you can select the data to be loaded in
all settings saved in the event.
Now, let's recall EVENET12 (PAGE1, Number Button 2) again, but
without loading KEY1
settings .
(1) Press EVENT in the SELECT/KEYPAD block.
(2) Select 1 (PAGE 1) in the [EVENT MEMORY] menu. Set
DIRECT to OFF.
(3) Press 2 on the keypad. The [EVENT RECALL] menu will be displayed.
(4) Turn F1 to select KEY1. Set both
XPT and DATA to OFF.
EVENT :SELECT : XPT : DATA : RATE : 1/3
RECALL : =
KEY1 : = OFF : = OFF : =OFF :P.00
(5) Press RECALL. A beep will sound and the settings in EVENT 12, excluding KEY1 settings,
are loaded to the control panel.

Data can also be selected when storing to events. See 15-4. "Event Data " for details.
Last Recall No.
Page No.
Page No.
MENU ATTACH
DIRECT
PATT
DETACH
SETUP
KEY1
8 9
4 5 6
STILL MATT FILE
KEY2 DSK1 DSK2
EVENT
MACRO
1 2 3
0
CLEAR
RECALL STORE
ENTER
CK EFFECT
TRANS RATE WIPE
SELECT /KEYPAD
±
7