7
(3) Tighten the two screws on both sides to secure the front panel to the chassis.
ALARM
POWER 1
ALARM
ON
OFF
POWER 2
DIGITAL VIDEO SWITCHER
ALARM
POWER 3
ON
OFF
ON
OFF
HVS-2000
3. Checking the Menu
(1) Connect power cords and power ON the switcher system. Open the STATUS menu to verify
that the HVS-2000DVE and/or HVS-2000DVE-EX is properly displayed in the menu.
①
Open [
STATUS
>
OPTION
] menu.
②
Check that "
INSTALLED
" is displayed for
HVS-2000DVE
.
Check that “
INSTALLED
” is displayed for HVS-2000DVE-EX when HVS-2000DVE-EX is
installed. (See the figure below.)
(2) Open a [
MODIFY
>
WARP
] menu (such as [
M/E FLEXaKEY
>
M/E2
>
KEY1
>
MODIFY
>
WARP
]) to verify that the 3D DVE is functional.
See "Pattern Transition" and "DVE Effects" in the HVS-2000/OU Operation Manual for details
on 3D DVE operation.
Screw
Screw
