7
2-3-1. Installing Cable A
(1) Install the
two black connectors
of
Cable A
by inserting them into the upper holes of the
plate as shown below. The connector label should be facing
up
.
(2) Use the four supplied binding screws (large) to secure both sides of the connectors to the
plate.
(3) Connect the
8-pin plug
(white) of Cable A to
Socket a
on the power supply tray as shown
below.
(4) Connect the
5-pin plug
(with black/brown thin wires attached) of Cable A to
Socket b
on
the power supply tray as shown below.
Cable A
8-pin
plug
5-pin
plug
Standard power supply
HVS-100PSM
Socket a
Socket b
Label facing UP
Standard power supply
HVS-100PSM
Содержание HVS-100PSM
Страница 1: ...HVS 100PSM Redundant Power Supply for MU 2nd Edition INSTALLATION GUIDE...
Страница 4: ......
