4
1-2. Inserting a Card into a Slot
(1) Turn off the power of your Main Unit and disconnect the power cord(s).
(2) Remove the two screws securing the blank panel of Slot B or C and remove the blank panel.
(3) Position the card between the guide rails of the slot and insert the card into the slot.
NOTE
Do not force the card into the slot. When inserting, be sure that the card is firmly positioned
between the guide rails and not tilted.
(4) Make sure that the card is inserted correctly and tighten both screws on the rear panel.
(5) Connect the power cord and turn on the power of the switcher.
1-3. Checking the Installation
Check the STATUS menu to see that the input card(s) you have installed into the slot(s) is properly
recognized.
HVS-100
Open the [SETUP - STATUS - OPTION] menu. Check that the input card(s) you have installed into
the slot(s) is recognized. The menu example below shows an HVS-100DI-A is installed in SLOT-A
and HVS-100AI in SLOT-B.
STATUS :SLOT-A >
HVS-100DI-A
> v01-00 : 1/3
OPTION :SLOT-B >
HVS-100AI
> v01-00 :
HVS-2000
Open the [STATUS > OPTION] menu. Check that the input card(s) you have installed into the
slot(s) is recognized.
VRP-100
Open the [SETUP - STS] menu on the VRP-100RU. Check that the Input Card(s) you have
installed into the slot(s) is recognized.
HVS-490
Open the [STATUS > OPTION] menu. Check that the input card(s) you have installed into the
slot(s) is recognized.
