FOR-A FA-AUX30, Руководство по эксплуатации

Страница: 12 / 22

12
2-4. Setting LED Button Colors
FA-AUX30 LED button colors can be set in the following procedure.
WARNING
Do not access internal cards with the unit power ON. Always power OFF all connected
units / disconnect power cords prior to accessing the interior.
1) Remove the attachment screw from the blank panel on the rear panel.
2) Slide the blank panel to the left and remove from the rear panel.
3) Verify which DIP switch settings to change by referring to the below figure (GPI button
locations) and table (GPI-DIP switch assignments) for the connections.
For example, to change the LED color of the GPI 1 button, pins 1 and 2 on SW1 must be
changed.

GPI button locations

GPI-DIP switch assignments
SW Pin No. GPI SW Pin No. GPI SW Pin No. GPI
SW1
1-2 1
SW4
1-2 11
SW7
1-2 21
3-4 2 3-4 12 3-4 22
5-6 3 5-6 13 5-6 23
7-8 4 7-8 14 7-8 24
SW2
1-2 5
SW5
1-2 15
SW8
1-2 25
3-4 6 3-4 16 3-4 26
5-6 7 5-6 17 5-6 27
7-8 8 7-8 18 7-8 28
SW3
1-2 9
SW6
1-2 19
SW9
1-2 29
3-4 10 3-4 20 3-4 30
5-6 - 5-6 - 5-6 -
7-8 - 7-8 - 7-8 -
GPI1 GPI2 GPI3