31
8. WEB Browser Settings
This section describes FA-95RU settings via a web browser.
See section 3.
“Connections” for details on connecting with a computer.
Open a web browser on the connected computer, and enter the address http://192.168.0.100/
(factory default setting) in the address bar. The Information window as shown below appears.
8-1. Information
Unit Information
Item
Description
Serial Number
Serial number of FA-95RU
FPGA Version
FPGA version of FA-95RU
Soft Version
Software version of FA-95RU
Network Information
Item
Description
IP Address
IP address of FA-95RU
Subnet Mask
Subnet mask of FA-95RU
Default Gateway
Gateway of FA-95RU
MAC Address
MAC address of FA-95RU
TCP Port Number
TCP port number FA-95RU
Connection Status
Item
Description
Mode
Shows the selected connection state.
Disconnect: Indicates no FA-9500/FA-9520 is connected
FA-9500: Indicates an FA-9500 is connected.
FA-9520: Indicates an FA-9520 in FA-9520 mode is connected.
FA-9520 (FA-9500 mode): Indicates an FA-9520 in FA-9500 mode is
connected.
Status
Shows the status of connection with FA-9500.
Unit ID
Shows registered ID number if the connected FA-9500
’s IP address is
registered using Unit ID Assignment
*1.
Shows the message
“IP Address Select” if the connection is established
via the IP ADDR SEL menu
*2
Host Address
Shows the IP address of the connected FA-9500.
Unit Name
Shows the unit name of the connected FA-9500.
*1 See section 8
“WEB Browser Settings” for details.
*2 See section 5-2
“IP Address Selection Mode” for details.
