FOR-A FA-10RU, Руководство по эксплуатации

Страница: 40 / 139

40
6-9. COLOR CORRECTION BLACK LEVEL
F S 1 N a m e : F S 1
- - - C O L O R C O R R E C T I O N B L A C K L E V E L - - -
P 5 0 9
F S 1 R : 1 0 0 . 0 % G : 1 0 0 . 0 % B : 1 0 0 . 0 %
F S 2 R : 1 0 0 . 0 % G : 1 0 0 . 0 % B : 1 0 0 . 0 %
F S 3 R : 1 0 0 . 0 % G : 1 0 0 . 0 % B : 1 0 0 . 0 %
F S 4 R : 1 0 0 . 0 % G : 1 0 0 . 0 % B : 1 0 0 . 0 %
F S 5 R : 1 0 0 . 0 % G : 1 0 0 . 0 % B : 1 0 0 . 0 %
Parameter Default
Setting range
(Steps)
Description
Black Level(RGB) 100.0%
0.0 - 200.0%
(0.1% *
1
)
Allows you to adjust R, G, and B
components of the black level
separately for the selected FS.
F4 allows you to adjust R, G, and B
components simultaneously.
*
1
0.5% for FA-505 Software Version less than 2.10
The FS number of the selected FS blinks. FS numbers of linked FSs also blink.
Displays
“---“ if the parameter setting cannot be changed due to the Correction Mode setting.
To change the FS selection to set settings, refer to section 5-3-7.
“Selecting 5-channel Frame
Synchronizers
.”
To simultaneously change settings of multiple FSs, refer to section 5-3-8.
“FS Link Function.”
* If the selected FS bypasses the Color Correction process, this menu is disabled. Change COLOR
CORRECTION BY-PASS to Operate , then reset the parameter. (See section 6-16.)
6-10. COLOR CORRECTION GAMMA LEVEL
F S 1 N a m e : F S 1
- - - C O L O R C O R R E C T I O N G A M M A L E V E L - - -
P 5 1 0
F S 1 R : 1 0 0 . 0 % G : 1 0 0 . 0 % B : 1 0 0 . 0 %
F S 2 R : 1 0 0 . 0 % G : 1 0 0 . 0 % B : 1 0 0 . 0 %
F S 3 R : 1 0 0 . 0 % G : 1 0 0 . 0 % B : 1 0 0 . 0 %
F S 4 R : 1 0 0 . 0 % G : 1 0 0 . 0 % B : 1 0 0 . 0 %
F S 5 R : 1 0 0 . 0 % G : 1 0 0 . 0 % B : 1 0 0 . 0 %
Parameter Default
Setting range
(Steps)
Description
Gamma
Level(RGB)
100.0%
0.0 - 200.0%
(0.5%)
Allows you to adjust R, G, and B
components of the gamma level
separately for the selected FS.
F4 allows you to adjust R, G, and B
components simultaneously.
The FS number of the selected FS blinks. FS numbers of linked FSs also blink.
Displays
“---“ if the parameter setting cannot be changed due to the Correction Mode setting.
To change the FS selection to set settings, refer to section 5-3-7.
“Selecting 5-channel Frame
Synchronizers
.”
To simultaneously change settings of multiple FSs, refer to section 5-3-8.
“FS Link Function.”
* If the selected FS bypasses the Color Correction process, this menu is disabled. Change COLOR
CORRECTION BY-PASS to Operate , then reset the parameter. (See section 6-16.)
CC
SETUP
2
CC
SETUP
2