Foolography Unleashed D200+, Инструкция по эксплуатации

Страница: 4 / 12

Initial pairing with a new GPS Receiver
• To carry out the pairing procedure, please turn
off all bluetooth devices, to avoid interferences.
• Turn on the GPS - it does not necessarily need to
have a fix yet.
• Turn on your camera, set it to single shot (S).
Press the shutter and keep it pressed.
• Insert the Unleashed into the 10-pin port on the
front of your Nikon DSLR, and keep the shutter
pressed for 10 seconds. The LED will blink red,
once per second for 5s, then twice per sec for 5s.
• As soon as the LED starts to blink green, let go of
the shutter within 5s. The LED will light up green
for 5s and the automatic pairing routine will
begin.
The Unleashed will search all Bluetooth devices in
the vicinity, (slow alternate blinking for up to 10s),
then connect to each found device in turn, and
check for GPS data (fast alternate blinking). If it
finds a GPS, it will store its address, and
automatically connect to this GPS from that point
on. To show success, the LED will light up green for
5 seconds. If no GPS is found, the LED will light up
red for 5s. In this case, please repeat the procedure.
3