FoodSaver VS1100 Series, Руководство пользователя, Страница: 7 / 10

11 10
H
OW
T
O
1. Place item(s) in bag, allowing at least 3 inches
of space between bag contents and top of bag.
2. Open appliance lid and place open end of bag into
Vacuum Channel.
3. Close lid and slide Lock Latch to
OPERATE position. Both indicator lights will turn on
once the latch has been pushed all the way down.
4. Press Vacuum button to begin vacuum and sealing
process. Motor will continue to run until bag is fully
vacuumed, then will automatically seal.
5. When Seal Indicator Light stops flashing and
becomes constant, slide Latch to OPEN position, lift
lid and remove bag.
NOTE: Let appliance cool down for 20 seconds after
each use.
2. Vacuum Seal with FoodSaver
®
Bags
Place Bag in Vacuum Channel
Close and Latch Lid
Press Vacuum Button
Important Tips:
To minimize bag waste, do not insert bags too
far into the appliance. Only insert bag just over
the edge of the removable drip tray.
H
OW
T
O
3. Vacuum Seal with FoodSaver
®
Accessories
Connect Accessory Hose to both accessory
port on appliance & port on accessory
Close and slide Lock Latch to the
OPERATE position
Press Vacuum Button
1. Prepare container according to FoodSaver ®
Accessory Guidelines (see manual that comes with
your Accessory Kit).
2. Insert one end of the Accessory Hose into Accessory
Port on appliance until it clicks into place. Connect
other end to the accessory per Accessory Guidelines.
3. Close lid and slide Latch to OPERATE position. Both
indicator lights will turn on once the latch has been
pushed all the way down. Press the Vacuum button.
4. When the light becomes constant, the vacuum
process is complete. Note that the appliance will still
go through the sealing cycle when vacuum sealing an
accessory. You can slide the latch to Open position
if you want to stop the sealing cycle, but it is not
necessary.
5. Remove Accessory Hose from accessory and
appliance.
6. To test vacuum, simply tug on accessory lid.
It should not move.
Handheld sealer can be used with Vacuum Zipper Bags.
1. Fill zipper bag, lay flat with grey circle facing upwards.
Squeeze air out, zip 3/4 of the way closed and squeeze any
remaining air out before zipping completely.
2. Press Handheld Sealer over gray circle on bag and press
Vacuum button.
How to...
4. Use Handheld Sealer with
Vacuum Zipper Bags
OPEN EN
D
SEALE
D END
OPEN EN
D
SEALE
D END
OPEN EN
D
SEALE
D END
OPEN EN
D
SEALE
D END
OPEN EN
D
SEALE
D END
OPEN EN
D
SEALE
D END
Customer Service: 1 (877) 777-8042 www.FoodSaver.com