Kink
Curved
round
Twists
Slight
bend
Sweeping
bend
Step 9:
Step 10:
Mount Faucet to Deck
Install gasket into the groove under the faucet base. Insert faucet tubes and shank through the mounting
hole in the sink; and, place faucet over the mounting hole.
Secure faucet to sink with washer and mounting nut. Tighten securely by hand. Using a screwdriver,
tighten locking screws.
Loop the supply lines, if possible, to avoid having to cut them. Finger tighten both hot & cold sides. Tighten
one additional turn with a wrench. Use a second wrench to ensure you do not over tighten the check
valves. Repeat for the other side.
Make sure water supplies are closed. Move handle to the full mix position. Place bucket under the faucet
outlet tube.
Slowly open both water supply stops to
flush
lines. This will prevent debris from being lodged in the hose
and sprayer.
Close water supplies and faucet valves.
Remove the bucket and dry tube with a soft cloth.
Connect the battery cable to the battery box. Install 4 “AA” batteries into the battery box.
Important: DO NOT install batteries before making all electrical connections.
Note: It is critical for the batteries to be installed in the correct direction in the battery box.
Place the battery pack in a convenient location close to the flo
or.
Place flat on the floor for best performance and at least 2" from
cabinet walls and other objects.
Note: If the battery pack does not reach the
floor,
place on a non-metallic object at least
2"
from cabinet
walls.
Turn on water supplies. Turn faucet valve on full and check connections are properly made.
Flexible Connecting Hose
Care must be taken when connecting the
flexible
connection hose from the power supply box to the spout
to ensure it does not bend sharply and kink or twist.
See above for recommended ways to fit the flexible connecting hos
e.
FontanaShowers
©
FontanaShowers
©
FontanaShowers
FontanaShowers
Customer Service: 800-684-4489
fontanashowers.com
5
