FontanaShowers
©
FontanaShowers
©
FontanaShowers
FontanaShowers
Customer Service: 800-684-4489
fontanashowers.com
4
Step 3:
Waterpipe Instructions
Kink
Curved
round
Twists
Slight
bend
Sweeping
bend
Temperature Control
Manual temperature control handle allows users to
set preferred temperature.
Flexible Connecting Hose
Care must be taken when connecting the
flexible connection hose from the power
supply box to the spout to ensure it does not
bend sharply and kink or twist.
See above for recommended ways to fit the
flexible connecting hose.
Important: Failure to follow these guidelines
may result in poor performance and damage
to the flexible connection hose.
1. Screw the hose into the corresponding
screw-hole of the faucet body. Fix the o-ring into
the bottom groove of the faucet body.
2. Insert hose, threaded pipe and data cable
through the drilled hole of the countertop. Put
rubber washer and metal washer onto the
threaded pipe, screwing in mounting nut.
Adjust the faucet body correctly and tighten the
mounting nut with screws.
3. Install the control box to the faucet.
4. Then connect the battery cable to the control
box.
5. Make Connections to water supplies. Turn on
the water supply and flush water lines into a
container for one minute.
Important: This flushes away any debris that
could cause damage to internal parts.
6. Connect waterlines to angle stops. Turn on
the angle stops and check for leaks (DO NOT
TURN FAUCET ON).
7. Turn the faucet on for 1 minute to flush any
debris.
