FONON SBM Series Скачать руководство пользователя страница 2

Страница: 2 / 86

Introduction

Technical Support

Disclaimer

Thank you for purchasing a product in the SBM series. This product is warranted to be free of

manufacturing defects for one year from the date of purchase. If you cannot find the solution to your

particular application, or, if for any reason you need additional technical assistance. Our technical

support group is glad to work with you in answering your questions, please use the ways as following:

Tel: 844.44.LASER (52737)

Fax:

(407) 804-1002

Email: [email protected]

Web: www.fonon.us
Address: 400 Rinehart Road #1000, Lake Mary, FL 32746

The information provided in this document is believed to be reliable. However, no responsibility is

assumed for any possible inaccuracies or omissions. Specifications are subject to change without

notice. The Windows 2000/XP/Vista are registered trademarks of Microsoft. Other trademarks are the

property of their respective owners.

Fonon reserves the right to make changes without further notice to any products herein to improve

reliability, function, or design. Fonon does not assume any liability arising out of the application or use of

any product or circuit described herein; neither does it convey any license under its patent rights, nor

the rights of others.

Special Symbols

Failure to follow instructions may lead to product damage, or error.

Failure to follow instructions may lead to injury by electric shock.

Failure to follow instructions may lead to injury by invisible radiation.

Содержание SBM Series























































































Результаты поиска

Содержание SBM Series

Отзывы:

Похожие инструкции для SBM Series

Бренды по названию

Популярные бренды

FONON SBM Series, Руководство пользователя

Результаты поиска

Содержание SBM Series

Отзывы:

Похожие инструкции для SBM Series

Бренды по названию

Популярные бренды