FONESTAR SM-507UB, Инструкция по эксплуатации

Страница: 3 / 20

REAR PANEL
1.- Power supply input for the mains adapter provided.
2.- Stereo headphone output, 6.3 mm jack connector (CUE).
3.-
MASTER OUTPUT
: master signal output, 2 x RCA connectors.
4.-
CH 3
: line level input for channel 3, 2 x RCA connectors.
5.-
CH 2
: phono/line level input for channel 2, 2 x RCA connectors.
6.-
CH 1
: phono/line level input for channel 1, 2 x RCA connectors.
7.-
MIC
: unbalanced microphone input, 6.3 mm jack connector.
CONNECTION
- Before making any connections, make sure that all the devices in the installation are switched off.
- Check that the volume controls in each channel (CH 1 to CH 3) and that the microphone and headphones
volume controls are at their minimum.
- Check that the crossfader sliding control is set at midway.
- If connecting audio sources with line level output (such as CD players) to the inputs CH 1 and CH 2, place
the corresponding selector in the front panel in the LINE position.
- If connecting a record player to inputs CH 1 and CH 2, place the corresponding selector on the front panel
in the PHONO position.
- Channel 3 can be selected if you wish to listen to the USB/MP3/BT player or the line input connected to
the rear panel of the mixer (CH 3). In order to reproduce via Bluetooth, pair your device to the
SM-507UB
- Connect a dynamic microphone to the MIC input.
- Switch on the devices in the installation in this order: audio sources, mixer
SM-507UB
and finally the
amplifier.
- Adjust the volume in each channel using the corresponding controls.
- 3 -
EN
SM-507UB_MANUAL_(EN_ES_FR_PT)_20210226-2021.qxp_SM-507UB 26/2/21 9:05 Página 3