FONESTAR SM-3512U Скачать руководство пользователя страница 2

EN

- 2 -

We take this opportunity to thank you for buying this product.

We recommend you read the instruction manual before switching on the machine and follow the instructions that
are given. Keep the manual for future reference.

SECURITY AND THE ENVIRONMENT

ELECTRICAL SECURITY
Check that the current in the mains connection where the machine is to be installed corresponds
to the power supply of the machine.
To avoid damaging the equipment, electrical shocks, fire or physical injury when you connect or
disconnect the equipment from the power supply, pull the plug firmly out of the mains socket holding
the plug, never the cable.
Always do this with dry hands.
Keep the power supply cable far from sources of heat. Do not put heavy objects on top of it or
change it.
Clean dust and dirt off the power supply cable regularly.
Do not open the machine; you could get an electric shock.

CAUTION
While installing the machine, make sure it is switched off and unplugged.
Do not open the machine. Touching the internal parts is dangerous and you could receive an electric
shock.
The machine must not be splashed or dripped on. Never place recipients with liquid inside on the
machine.
Do not place anything inside the machine.

LOCATION
Place the equipment on a horizontal surface with enough space around it to allow ventilation.
Avoid direct sunlight, heat sources and excessive dust.
Do not place the machine near magnetic fields or static electricity.
Do not use surfaces that vibrate or receive impact.
Do not pile machines on top of one another.

VENTILATION
Never block or cover the ventilation slits on the machine.
Do not expose it to direct sunlight or place it near sources of heat.

PERIODS OF INACTIVITY
When the machine is not going to be used for a long period, disconnect it from the mains.
If you are using an adapter, take into account that it will continue using electricity even if the machine
is switched off. If it is not going to be used for a long period, disconnect it from the mains.

THE ENVIRONMENT
To save energy, switch the machine off when you are not going to use it for a long time. The machine
could contain substances that are harmful to the environment or human health. To minimize the
effect of these substances the machine must be correctly managed and recycled when you decide
to dispose of it. 
When you dispose of it remember: it cannot be thrown into a conventional rubbish bin.
If it contains or uses batteries, these must be disposed of separately.
The machine (without batteries) must be disposed of correctly. Put it in a container specially intended
for the collection of electronic and electrical appliances, at the dump or hand it over to the dealer
when you purchase similar equipment, so that the dealer can dispose of it corr

SM-3512_SM-3520U_MANUAL_ENG_20130624_Maquetación 1  24/06/2013  12:40  Page 2

Содержание SM-3512U













Отзывы: