FONESTAR SM-3192, Инструкция по эксплуатации

Страница: 7 / 12

CONNECTION
- Before making any connections make sure that all the devices are switched off and disconnected from the
power supply.
- Check that the volume controls of each channel and the sliding volume control MAIN MIX are at their
minimum.
- Connect the required devices to the channel inputs, use the XLR connector if it is a microphone or the jack
connectors if it is a line level input.
- The send aux post-fader AUX/EFX can be used to connect an external audio processor.
- Connect the unbalanced MAIN OUT output to a line level input of an amplifier. If you wish, the CTRL
ROOM output can be connected to autoamplified monitorized loudspeakers.
- Connect the devices to the power supply.
- Switch on the devices in this order: firstly the peripheral devices such as CD players, followed by the ,
mixer SM-3192 and finally, the power amplifier.
TECHNICAL SPECIFICATIONS
SM-3192
CHARACTERISTICS Stereo mixer with 4 mono channels and 4 stereo channels.
16 digital effects processor.
INPUTS 4 balanced mics., XLR or 4 balanced lines 6.3 mm jack
4 balanced aux line stereo channels, 2 x 6.3 mm jack
1 CD/tape in stereo, 2 x RCA
CONTROLS 8 controls per mono channel : gain, 3-band equalizer, bass filter,
aux/effects send, pan, volume and LED clip indicator
4 controls per stereo channel: attenuation, aux/effects send, balance and
volume
Effects and send selection
Headphone volume
Independent main output volume control.
OUTPUTS Unbalanced stereo main, 2 x 6.3 mm jack
Unbalanced mono aux/effects, 6.3 mm jack
Unbalanced stereo control room, 2 x 6.3 mm jack
Stereo CD/tape out, 2 x RCA
Stereo headphones, 6.3 mm jack
PHANTOM
48 V
RESPONSE 20-20,000 Hz
POWER SUPPLY 18 V AC x 2, 650 mA with adapter included
DIMENSIONS 254 x 50 x 224 mm depth
EN
- 7 -
160928_SM-3192_MANUAL_(EN)_Maquetación 1 28/9/16 10:23 Página 7