PARALLEL MODE (PAR)
Place the MODE selector in the PAR position. In this mode, the input signal for channels for channels CH1
and CH2 is the CH1 input signal and the input signal for channels CH3 and CH4 is the CH3 input signal.
Connect the inputs to CH1 and CH3 and the 4 speaker outputs to pins 1+, 1- on the connector. The channel
volume is adjusted separately.
BRIDGE MODE (BRD)
Move the MODE selector to the BRD position. In this mode, the CH1 and CH2 input is the CH1 input signal
and the two channels connect internally so that the power is joined to make just one output. The CH1 output
must be used with pins 2+, 2- on the connector. At the same time channel CH3 and CH4 input is the CH3
input signal and the two channels are connected internally so that their total power is in just one output. The
CH3 output must be used with pins 2+, 2- on the connector. Connect the CH1 and CH3 inputs and the 2 CH1
and CH3 speaker outputs. The channel volume is adjusted with the CH1 and CH3 VOLUME controls.
- 6 -
EN
