CHANNEL
FREQUENCY
CHANNEL
FREQUENCY
CH 1
863.05 MHz
CH 9
864.05 MHz
CH 2
863.15 MHz
CH 10
864.2 MHz
CH 3
863.3 MHz
CH 11
864.35 MHz
CH 4
863.4 MHz
CH 12
864.45 MHz
CH 5
863.55 MHz
CH 13
864.6 MHz
CH 6
863.65 MHz
CH 14
864.7 MHz
CH 7
863.8 MHz
CH 15
864.85 MHz
CH 8
863.9 MHz
CH 16
864.95 MHz
- 6 -
EN
4.-
Battery compartment
: use two 1.5 V batteries type LR6-AA, preferably alkaline. When inserting the
batteries make sure that the polarity is correct.
5.-
Open the battery compartment cover to access the transmission channel selectors. Place them in the
same position both on the transmitter and on the receiver for correct audio transmission. For more
information, consult the INSTRUCTIONS FOR USE section.
INSTRUCTIONS FOR USE
1.-
Connect the receiver to 12 V DC with the AC/DC adapter included with the device.
2.-
Place the aerial in a vertical position for best signal reception.
3.-
Select the transmission channel (frequency):
The transmitter (wireless microphone) and the receiver must be on the same channel. In order to do so,
place the selectors both on the transmitter and on the receiver on the same frequency for correct audio
transmission. For more information, consult the INSTRUCTIONS FOR USE section.
4.-
Switch on the receiver with the POWER switch. The LED indicator on the front panel will light up.
5.-
When the microphone is working (both the belt-pack and the hand-held), the LED RF indicator lights up
indicating signal reception.
6.-
Connect the AUDIO OUT output to the amplifier or mixer input and adjust the volume with the knob to
obtain a suitable audio output level.
MSH-814_MSH-816_MANUAL_(EN)_20180219_Maquetación 1 19/2/18 8:54 Página 6