guitar transmitter.
13.- Compartment for a 1.5 V LR03-AAA rechargeable battery. Insert a battery and move the switch (12) to
the ON position with the receiver connected to the power supply to recharge the battery and be able
to use it in the wireless guitar transmitter.
14.-
3 V DC
: power supply input for the mains adapter supplied.
15.-
10 dB PAD
: 10 dB attenuation selector.
16.-
OUTPUT
: unbalanced audio output, 6.3 mm mono jack connector.
Note
:
when you press the
A
button (9) to set the different receiver parameters, a MUTE indicator appears
on the display and it stops transmitting audio while the parameters are being set.
WIRELESS GUITAR TRANSMITTER
1.- Unbalanced audio transmitter, 6.3 mm mono jack connector.
2.-
IR
: wireless guitar transmitter infrared receiver. To synchronize the receiver and the transmitter, press
the
A
button (9) on the receiver until IR appears on the the receiver display. Then place this IR receiver
opposite the receiver one to establish the same channel in both.
3.-
15 dB PAD
: 15 dB attenuation selector.
4.-
POWER
: on/off button on the wireless guitar transmitter.
5.-
GAIN
: audio input sensitivity adjustment.
6.- Aerial.
7.-
Battery compartment
: use one 1.5 V type LR03-AAA battery, alkaline or rechargeable.
8.- LED operating indicator.
- 5 -
EN
