- 6 -
EN
CONNECTION
- Make the connections with the amplifier and all the audio system components switched off and
disconnected from the mains.
- Connect the audio sources (CD, video game console, music system, etc.) to each of the auxiliary inputs
on the amplifier.
- Connect the microphone to the MIC input.
- Connect the speakers to the speaker output. Use the 8Ω low impedance output or the high impedance
100 V lines output depending on the type of speakers you are connecting. Do not use both types of output
at the same time.
- If you are using the low impedance output, you must connect the speakers in a series/parallel circuit, so
that the charge impedance of the speakers is the same as the output impedance of the amplifier and that
the power supplied by the amplifier does not exceed that supported by the speakers.
- If you use the high impedance 100 V lines output, you must connect all the speakers in parallel and the
total power of all the speakers must not exceed the power supplied by the amplifier.
- Once the connections have been made (in accordance with ones needs), connect the equipment to the
mains and switch it on. Remember to turn the equipment on with the volume at its minimum.
- Adjust the volume to each auxiliary input with the controls on the back panel.
- After use, do not forget to switch off and disconnect the system from the mains.
