EN
- 5 -
CONNECTION AND OPERATING
- Place the equipment in the desired position, at least 1m from any obstacle or the nearest wall. However,
it can be installed on the wall, ceiling or stage structures using the adjustable mount, or on surfaces using
the tripod included.
- Connect the mains adapter and switch the equipment on.
- Select the automatic operating mode or audio activation. Adjust the motor speed and the intensity of the
strobe using the controls on the equipment or the remote control.
SPECIFICATIONS
SAFETY MEASURES:
do not open the equipment under any circumstances. Make sure that the equipment is at a
distance of at least 50 cm from inflammable substances or elements. Do not look directly at the laser from less than 15
cm or for more than 10 seconds, to avoid seriously damaging your eyes. Switch the equipment off for 15 minutes every
2 hours to avoid overheating. Do not switch it on and off continuously as this could shorten the lifetime of the laser.
LS-MATRIX30
CHARACTERISTICS
Mini laser RG 130 mW with remote control.
Geometrical shapes (stars, spirals, flowers and circles) and kaleidoscope
effect.
Automatic mode or audio activation.
Microphone incorporated.
Forced ventilation.
POWER
130 mW RG
R (650 nm): 100 mW
G (532 nm): 30 mW
CONTROLS
Automatic mode or audio activation
Remote control (standby, mode (auto, sound) and colour)
POWER SUPPLY
5 V DC, 1A with adapter included
DIMENSIONS
90 x 50 x 125 mm depth
ACCESSORIES
Tripod
Adjustable fixing mount
Remote control
