If MP3 files are being played, the playback modes are:
16.-
CD/USB/SD
: button which allows selection of available audio sources.
17.-
IR
: remote control infrared sensor.
REAR PANEL
1.-
CD 2 OUT
: output for the second CD/MP3/SD/USB player. 2 x RCA connectors.
2.-
CD 1 OUT
: output for the first CD/MP3/SD/USB player. 2 x RCA connectors.
3.-
Mains supply socket.
4.-
Power supply voltage selector.
REMOTE CONTROL
1.-
POWER
: player on/off switch.
2.-
1 - 9 / 0
: direct selection number buttons.
3.-
5
FOLDER
6
: in STOP mode changes to the previous/next
folder.
In playback mode (PLAY) it changes playback to the first file of
the previous/next folder.
In all cases when it reaches the last or first folder, it cyclically
selects either the first or the last folder respectively.
4.-
REPEAT
: pressing this button changes cyclically among the
different playback modes.
5.-
A-B
: one press of this button starts a loop. Press this button again
to end the loop. Then the selected section will be continuously
repeated.
Press this button again to return to the previous playback mode.
6.-
EJECT
: ejects the CD.
7.-
MUTE
: pressing this button activates the MUTE mode which
silences the audio output. Press this button again to deactivate it.
8.-
12
: starts or pauses playback.
9.-
3
: stops playback.
10.-
PROG
: activates the programming mode. Allows a playback program to be configured. With playback
in STOP select a track and press the PROG button again. Repeat these steps until the playback list has
been completed and press PLAY to start playback. To stop a program that is in progress, press STOP.
11.-
ID3
: activates or deactivates display of ID3 tag file information on the screen.
12.-
ESP
: to activate the anti-shock buffer memory. The player cyclically memorises approximately 40
seconds of music which can be played if the player cannot read the CD due to vibrations.
- 5 -
EN
FS-2925CDD_MANUAL_(EN)_20170301_Maquetación 1 1/3/17 13:29 Página 5
