FONESTAR FPRO Series, Инструкция по эксплуатации

Страница: 4 / 8

DESCRIPTION
The FPRO series loudspeakers are suitable for installations and live PA due to their installation possibilities
and their design characteristics. The wide range of loudspeakers with different powers, components and
acoustic characteristics offer the possibility to select the one which best suits each application. High
performance features to be taken advantage of.
- Autoamplified subwoofer in reinforced wood.
- Textured paint finish.
- Front metal grille.
- Carrying handles.
- Hole in the top for 35 mm tube.
CONTROLS AND FUNCTIONS
REAR PANEL
1.- OUTPUT : XLR balanced line level signal output connector to connect several devices in cascade.
2.- INPUT : XLR connector and 6.3 mm balanced line signal level input.
3.- PHASE : phase inversion selector. Inverts the phase of the subwoofer signal 180º.
4.- FREQUENCY : knob which allows the cut-off frequency value of the low pass filter to be selected.
5.- PROT : LED protection indicator. It lights up when the subwoofer protection is activated due to
temperature, surge or overcurrent. With the protection activated the audio output is cut off.
6.- SIGNAL LIMIT : LED signal peak indicator. It lights up when an excessively high input signal level is
detected in the subwoofer input channel or when there is an excessive output level which could cause
damage.
7.- POWER : LED subwoofer power indicator.
8.- MASTER : subwoofer output signal general volume control.
9.- AC power supply connection socket.
10.- Power supply voltage selector.
11.- POWER : device on/off switch.
- 4 -
EN
FPRO-SUB35015A_MANUAL_(EN)_20170919_Maquetación 1 19/9/17 12:01 Página 4