6. Computer software control usage guide
6.1 Network access:
Connect your PC / computer with the standard IGMP Ethernet switch via a single network cable.
6.2 PC / Computer Settings
Change the IP of the PC / computer to 192.168.1.xxx (xxx can be 0 to 255), which is the same as the
IP segment of the TX and RX unit.
6.3 Web operation
Open the application program "HDbitT E-Matrix Control center", it shows the interface as Figure 1
(Download from website: http://www.hdbitt.com/down load-matrix/).
Figure 1
IP configuration
TX and RX have their own default IP address, TX IP is 192.168.1.238, and the RX IP is 192.168.1.239.
Generally, it is not necessary to change the IP address of the device
, as the system can operate normally
even though multiple TX units and multiple RX units are connected to the system with their default IP
addresses.
If the IP setting is needed, follow the operation as in Figure 2 (here make an example of the TX IP setting only,
the RX setting is the same as the TX setting).
Figure 2
- 7 -
EN
FO-459-TX_FO-460-RX_manual_(EN_ES_FR_PT)_A5c_2020217-2021.qxp_Maquetación 1 17/2/21 11:04 Página 7