INSTRUCTIONS FOR USE
The transmitters and receivers come with factory assigned IP addresses, which are as follows:
CHANGING THE COMPUTER’S IP ADDRESS
In order to display mods.
FO-457M
and
FO-458MR
, using the software (HDbit T E-MATRIX Control Center)
the computer must have an IP address within the same range as the installation devices. If this is not the case,
follow the steps below:
1.- In your computer press Start/Control Panel/Open Network and Sharing Center.
2.- Select the option Change Adapter Settings and then select the Ethernet network card. With the right
button open the Options menu and select Properties.
- 7 -
EN
FO-457M_FO-458MR_MANUAL_(EN)_20200113.qxp_Maquetación 1 13/1/20 8:19 Página 7
